The Jet Venturi Scrubber and other CR Clean Wet Scrubbers


air_products_wetscrubbers_pic1The Jet Venturi Scrubber utilizes a liquid motivated ejector design to entrain contaminated gases, generally without the need for a blower. The relatively high liquid-to-gas ratio, liquid atomization, and open internal design provide effective scrubbing of heavily contaminated gases with minimal maintenance and virtually unlimited turndown capabilities. Its ability to handle wide ranging conditions while removing both toxic gases and particulate matter makes the Jet Venturi one of the most flexible designs available. It is often used as a first stage in a multi-stage pollution control system

Jet Venturi Brochure


PackedTowerThe Clean Air Group, LLC’s Packed Tower Scrubber utilizes a vertical countercurrent design for highly efficient absorption of a variety of toxic gases. In addition to its extensive use in air pollution control, the Packed Tower can serve as a gas/liquid contactor in a number of process applications. Efficiencies of 99.99% and greater are not unusual for many scrubbing applications. During operation, gas flows upward through a packed bed while scrubbing liquid flows down (by gravity) over the packing material. The counter-flow design principle offers optimal mass transfer. The Clean Air Group, LLC supplies cross flow and co-current flow Packed Tower designs as well.


HighEnergyVenturiThe High Energy Venturi Scrubber is ideally suited to the capture of small particles less than 3 microns in size. It is effective as well in the submicron range and requires little or no maintenance. For applications where variations in gas flow require throat gas velocity compensation to maintain specified scrubbing efficiencies, the Clean Air Group, LLC offers automatic and manually variable throat designs. The automatic throat is used where flow conditions vary widely and frequent adjustments are required. When occasional variations occur, a manually-controlled throat is available.